Specifications & Technical Data

The John Deere 6155R is the largest in the line of mid-frame six-cylinder which, like all John Deere 6000 series, comes with a full chassis design.The rear hitch, axles and optional loader attach directly to it, while the engine and transmission are cradled inside, allowing the chassis to bear the stress, not the individual components.

John Deere 6155R Tractor Key Facts

  • Engine displacement: 6.8 L 415 cu in.
  • Rated PTO power: 121 hp
  • Rated engine power: 155 engine hp
  • Transmission: 20 Speed AutoQuad PLUS™ ECO (40K)
  • Steering: Hydrostatic power
  • Country of Manufacture: United States

John Deere 6155R Tractor Specifications

ENGINE
DescriptionJohn Deere PowerTech™ PVS
Engine typeDiesel, in-line, 6-cylinder, wet-sleeve cylinder liners with 4 valves-in-head
Engine familyHJDXL06.8302
Rated speed2100 rpm
AspirationTurbocharged, variable geometry turbocharger with air-to-air aftercooling and cooled exhaust gas recirculation
Emission levelFinal Tier 4
After treatment typeDOC/DPF/SCR
Displacement6.8 L
415 cu in.
Engine performance
Rated power97/68EC: 116 kW
155 engine hp
Rated PTO power (hp SAE)90 kW
121 hp
Engine peak torqueAt 1,600 rpm: 724 Nm
533 lb-ft
PTO torque rise40 percent
Transmission
TypeStandard: 20 Speed AutoQuad PLUS™ ECO (40K)
Optional: 16 speed PowerQuad PLUS™
20 speed AutoQuad PLUS™ (50K)
DirectDrive™ ECO (40K)
Infinitely variable transmission (IVT): 0.050-42 km/h
0.030-26 mph
Infinitely variable transmission (IVT) 0.050-50 km/h
0.030-31 mph
Hydraulic system
TypeClosed-center, pressure/flow compensated
Pump rated outputStandard: 45 cc pump: 114 L/min
30 gpm
Optional: 60 cc pump: 155 L/min
41 gpm
Available flow at a single rear SCV100 L/min
26 gpm
Number of rear selective control valves (SCVs)Standard: ISO Couplers: 3
ISO Couplers: 3-6
SCV controlMechanical
Rear hitch
Hitch category (SAE designation)Category 3/3N: 4170 kg
9193 lb
Sensing typeElectrohydraulic
Drawbar
Drawbar categoryCategory 2
Maximum vertical loadCategory 2: 1400-2450 kg
3085-5400 lb
Maximum vertical load dependent on drawbar position
Rear power take-off (PTO)
TypeIndependent
Standard: 35 mm (1.375 in) 540, 1000 rpm reversible shaft
Optional: 35 mm (1.375 in) 540, 540E, 1000 rpm reversible shaft
Engine rpm (at rated PTO speeds)1967 engine rpm at 540 rpm PTO
1753 engine rpm at 540E rpm PTO
2000 engine rpm at 1000 rpm PTO
Rear axle
TypeStandard: 92 x 2550 mm
3.62 x 100.4 in.
Optional: 92 x 2808 mm
3.62 x 110.5 in.
Final drive typeInboard planetary three pinion
Rear differential lockFull-locking electrohydraulic
Front axle
TypeStandard: MFWD
Triple link suspension (TLS™)
Front axle differential lockMFWD: limited slip
Triple link suspension (TLS™): limited slip
Triple link suspension (TLS™) with brakes: full-locking electrohydraulic
Tires
Wheel tread rangeMFWD: 1524-2235 mm
60-88 in.
Triple link suspension (TLS™): 1524-2235 mm
60-88
Steering
TypeHydrostatic power
Electrical system
Alternator sizeStandard: 200 amp
Optional: 240 amp
Battery options12 V
Total cold cranking amps1230 CCA
with cold weather package or IVT: 1400 CCA
Operator station
SeatStandard: Air suspension
Optional: Deluxe air suspension–
Cab suspensionOptional
Instructional seatOptional
DisplayLCD insturment cluster
Standard: CommandCenter™ display: 178 mm
7 in.
Optional: CommandCenter™ display: 254 mm
10 in.
RadioOptional
Inner cab volume3.33 m 3
117.59 cu ft
Cab glass area6.11 m 2
65.77 sq ft
Dimensions & weight
Wheelbase2WD: 2985 mm
117.5 in.
MFWD: 2765 mm
108.8 in.
Front axle centerMFWD/TLS™ axle under differential housing w/ 380/85R30 tires: 584 mm
23 in.
Approximate shipping weight, Open;Cab6560 kg
14462 lb
Base machine weight
Maximum permissible weight11750 kg
25904 lb
Capacities
Crankcase oil volume23.5 L
6.2 U.S. gal.
Fuel tank270 L
71.3 U.S. gal.
Diesel exhaust fluid (DEF) tank16 L
4.2 U.S. gal.
Cooling system27 L
7.1 U.S. gal.
Transmission-hydraulic systemPowrQuad™/AutoQuad™: 63 L
16.6 U.S. gal.
DirectDrive™ ECO: 75 L
19.8 U.S. gal.
IVT: 62 L
16.4 U.S. gal.
Serviceability
Interval for engine oil change750 hours
Interval for hydraulic/transmission oil change1,000 hours
Interval for engine coolant change6,000 hours
Loaders
Loader640R
Lift capacity at full heightMechanical self-leveling: measured at 800 mm ahead of pivot: 2148 kg
4736 lb
Non self-leveling: measured at 800 mm ahead of pivot: 1738 kg
3832 lb
Maximum lift heightMechanical self-leveling: bucket level: 4060 mm
160 in.
Non-self-leveling: bucket level: 4060 mm

Share to friends
FIELDER EQUIPMENT